i started building a johnson-su composter, modelled after dan's design, but with a few modifications of my own... mine is about 4'x4'x4' and will have a hinged skylight as the cover. i plan to build removable slats to access compost from the front. luckily, i was able to gather enough used supplies ( wood salvaged from scaffolding, pallets, fence; skylight; 4" perforated pvc drain pipes; hinges ) to build it, otherwise it would have been a rather expensive build...
check out my youtube video below...
https://youtu.be/5poHn4Jyqn0
built a johnson-su composter, modelled after dan's design and with modifications of my own
- Attachments
-
- finished johnson-su composting bioreactor
- 20220329_132534.jpg (240.01 KiB) Viewed 69956 times
-
- 20220316_145214.jpg (421.25 KiB) Viewed 70172 times
Last edited by troy on Tue 29-Mar-2022, 18:17, edited 18 times in total.
-
- Site Admin
- Posts: 156
- Joined: Tue 21-Dec-2021, 22:04
- Has thanked: 38 times
- Been thanked: 40 times
Very nice. Does yours bring in fresh air from the bottom? It's best to circulate fresh air through the pile. One of the shortcomings of mine. Will you be pulling the pipes out a few days after it's loaded?
-
- Posts: 63
- Joined: Thu 30-Dec-2021, 12:57
- Has thanked: 4 times
- Been thanked: 14 times
It's very beautiful especially for something built from used components!
I'm curious about why it has a wooden floor (that is, a floor at all). To my understanding, the only reason to have the sides is for aesthetics and a lid is to protect the compost from the excessive rain we have in this region, which can wash away more nutrients than we'd like to lose. Did you have specific reason for not just having the compost pile on the ground, which would reduce the materials required for the bin and increase the ease of drainage, if there is excess water?
I'm curious about why it has a wooden floor (that is, a floor at all). To my understanding, the only reason to have the sides is for aesthetics and a lid is to protect the compost from the excessive rain we have in this region, which can wash away more nutrients than we'd like to lose. Did you have specific reason for not just having the compost pile on the ground, which would reduce the materials required for the bin and increase the ease of drainage, if there is excess water?
thank you and great questions. i have limited space in the garden and may move it at a later time. having a floor may deter animals that could get into the bin from below, and makes it easier to move. i modelled it after dan's design, which he uses as a hotbed/mini greenhouse to facilitate seed germination. if you look behind andrew, there is a cover made from a framed sheet of glass which allows sunlight in. the boards on the bottom are loose and have space between them, which allows for drainage. after dan's comment about bringing in fresh air from the bottom, i'm thinking about cutting round holes into the floor planks for the perforated pipes to sit into.PeasIntheRain wrote: ↑Thu 17-Mar-2022, 11:08 It's very beautiful especially for something built from used components!
I'm curious about why it has a wooden floor (that is, a floor at all). To my understanding, the only reason to have the sides is for aesthetics and a lid is to protect the compost from the excessive rain we have in this region, which can wash away more nutrients than we'd like to lose. Did you have specific reason for not just having the compost pile on the ground, which would reduce the materials required for the bin and increase the ease of drainage, if there is excess water?
also, i may use it as a large vermicomposter. andrew recommended a minimum 4'x4'x4' sized container to help composting worms survive our winters.
- Attachments
-
- Screen Shot 2022-03-17 at 3.03.35 PM.jpg (277.4 KiB) Viewed 70159 times
Last edited by troy on Fri 18-Mar-2022, 05:32, edited 2 times in total.
thank you dan! i am thinking about cutting 4" holes through the floor boards to allow the perforated pvc pipes to bring in fresh air from the bottom. i may drill more holes into the pipes to increase ventilation and just leave the pipes in there. what do you think?
- Attachments
-
- 20220316_130024.jpg (254.9 KiB) Viewed 70133 times
-
- 20220316_131725.jpg (230.09 KiB) Viewed 70135 times
made a bit more progress today. i cut out holes in the floor for the 4" diameter pvc pipes and drilled more holes into the pipes for better air flow. i will use 1/4" hardware cloth at the bottom of each pipe to keep rodents out.
- Attachments
-
- 20220319_113820.jpg (173.42 KiB) Viewed 70104 times
-
- 20220319_113033.jpg (185.37 KiB) Viewed 70104 times
built channels for slats that can be used to open and close the front of the composter, which will make it less of a hassle to harvest compost. i learned from dan's zoom webinar today that this composter is called a johnson-su composting bioreactor... thx dan!. the salvaged skylight i'm using as a lid, is rather heavy and i may have to install a couple of struts to help with lifting. so far, so good...
- Attachments
-
- 20220322_105852.jpg (298.86 KiB) Viewed 70057 times
mounted the hinges today and it's almost done! as you can see, there are slots which allow boards to slide in and out... accessing compost will be a breeze. i just have to rig up something to hold the heavy lid open and then it'll be done!
- Attachments
-
- 20220324_113617.jpg (260.34 KiB) Viewed 70020 times
-
- 20220324_113524.jpg (216.97 KiB) Viewed 70020 times
-
- 20220324_111224.jpg (247.25 KiB) Viewed 70020 times
it's done! i added a galvanized brace with cotter pins to preserve the shape of the box while under expansive lateral loads. since i didn't have enough carbon inputs, i skimmed some woodchips from pathways. i also added grass clippings and turkey compost as my nitrogen inputs.
- Attachments
-
- 20220329_105515.jpg (275.91 KiB) Viewed 69944 times
-
- 20220329_132544.jpg (249.65 KiB) Viewed 69955 times
-
- 20220329_110007.jpg (402.39 KiB) Viewed 69955 times
Last edited by troy on Tue 29-Mar-2022, 23:18, edited 3 times in total.